For avionics shops and repair stations
Plan the new panel on the customer's own photo
Bezelswap straightens and scales a phone photo of the instrument panel, lays new avionics on it at true size, and hands you the before-and-after, the quote on your letterhead and the work order for the hangar. One sitting at the counter.
30-day free trial · No card needed

Built for every panel upgrade
From one six-pack swap to a full glass retrofit, start where the customer's airplane is today.
Before any metal is cut
The real panel, not a generic outline
Most panel planners start from a drawing of a typical airplane. A forty-year-old airframe has had forty years of changes. Bezelswap starts from a phone photo of the panel in front of you, flattened and scaled, so the owner sees their own airplane with the new avionics in it.
See the procedure
TodayPlanned
Deliverables
One layout. Four documents.
Everything comes from the same true-scale layout, so the picture the owner approves, the price you quoted and the work order the hangar follows all agree.
- Customer presentationA full-screen before-and-after on your letterhead with the equipment list, the estimate and a place to accept.
- QuoteEquipment plus labor at your shop rate, with removal and new-panel lines.
- Work orderNo prices. Everything that comes out, where each unit goes, and what the owner supplies.
- Parts listEach unit with its mount, bezel size, eligibility and your price.

Eligibility, built in
Filtered for the customer's aircraft
Pick the aircraft, or type the tail number, and the catalog shows the units whose FAA STC lists that model. Each unit names its STC and the exact models it covers, so you can check the AML before you quote.
Every maker in one catalog
Flight instruments, navigators, radios, transponders, autopilots and engine monitors from the makers your customers ask for, each with its bezel size and where that size came from.
Your own units and prices go in the price book, so the quote matches what your shop actually sells.
Browse the catalog- Garmin
- Dynon
- Avidyne
- Aspen
- uAvionix
- J.P. Instruments
- Electronics International
Checked before it reaches the hangar
Every layout runs the same checks a careful avionics tech would, so surprises show up at the counter, not on the airplane.
- True scaleFlattened from the photo and scaled to a known size, with a second measurement to check it.
- Clearance and keep-outsFlags units too close to the edge, to each other, or over the control column and structure.
- Weight, power and wiringWeight and moment change, bus load, and a wire size for each unit's run.
- Required instruments and placardsA FAR 91.205 check for VFR and IFR, and the placards the change will need.
Built with working avionics shops
Bezelswap is shaped by real estimates, work orders and counter conversations. Every shop account starts with a 30-day trial, and billing stays in test mode during the beta, so no card is needed.

